JOURNAL OF TEXTILE RESEARCH ›› 2018, Vol. 39 ›› Issue (07): 153-158.doi: 10.13475/j.fzxb.20170906906

Previous Articles     Next Articles

Algorithm of processing code generation for pattern spline curves

  

  • Received:2017-09-30 Revised:2018-01-31 Online:2018-07-15 Published:2018-07-16

Abstract:

In order to simplify the design of pattern outline of the automatic equipment such as quilting, jacquard, knitting and so on, make up the defect that the complex curve in the existing textile equipment cannot be directly implanted, and increase the interpolation function of the B spline curve, the method for separating the spline curve into micro segment line or circle was used to obtain the simple pattern data containing only micro-segment straight line and micro-segment arc information. The line interpolation algorithm and circular interpolation were adopted to distribute stitching points on the pattern data uniformly. Programming simulation was carried out to verify validity using MatLab. The application results show that the approximate double circular arc can be smooth connected at the connection point together with first distributed continity and the number of fitting segments is least. The stitches of the pattern are evenly distributed together with the small error. The complex patterns interpolation can reach the requirements for processing and the numerical calculation is simplified. This method realizes complex curve application in computer numerical xintrol weaving engineering.

Key words: pattern outline, B spline curve, processing code, double-arc approach, MatLab simulation, pattern data

[1] . Three-dimensional modeling and deformation for weft knitted fabric loops [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(02): 177-183.
[2] . Design of pattern prepare system of double-faced jacquard circular knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(06): 129-0.
[3] . Dynamic analysis od shogging motion mechanism of guide bar on warp knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(11): 121-126.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!