JOURNAL OF TEXTILE RESEARCH ›› 2018, Vol. 39 ›› Issue (08): 124-129.doi: 10.13475/j.fzxb.20170905606

Previous Articles     Next Articles

Comprehensive performance of auxiliary nozzle of air-jet loom based on Fluent

  

  • Received:2017-09-25 Revised:2018-05-10 Online:2018-08-15 Published:2018-08-13

Abstract:

In order to improve the weft insertion performance of the air-jet loom and reducing the energy consumption, the structures and parameters of the auxiliary nozzle were optimized. By numerical simulatio analysis, using Fouent software, the influence of different sructures and parameters of the auxiliary nozzle on airflow velocity, velocity attenuation and air consumption at the outlet of the auxiliary nozzle were investigated. A method for evaluating the comprehensive comparison of the auxiliary nozzle was proposed to obtain an auxiliary nozzle with good injection performance and low air consumption. The results show that the injection performance of the auxiliary nozzle with the center annular distribution mode is better than that with the annular distribution. The auxiliary nozzle of same orifice number with the center annular distribution has the outlet airflow velocity decreasing with the decrease of the center orifice diameter. Under the same orifice area, air consumption of the auxiliary nozzle decreases gradually with the increase of nozzle oridice number, and the air consumption of 8 K04 auxiliary nozzle is minimum. It is found that the comprehensive performance of 7 K04 auxiliary nozzle is the best with high airflow velocity and low air consumption. The comprehensive performance of 5 K03, 6 K05,7 K04 and 8 K04 auxiliary nozzles are better than that of single circular orifice auxiliary nozzle.

Key words: air-jet loom, auxiliary nozzle, numerical simulation, Fluent software

[1] 毛新华.新型织造设备与工艺[M].北京:中国纺织出版社,2000:98. MAO Xinhua. Equipment & Techniques of Weaving Machine[M]. Beijing: China Textile &Apparel Press,2000:98.
[2] Adanur S, Turel T.Effects of air and yarn characteristics in air-jet filling insertion PartⅡ: yarn velocity measurements with a profiled reed[J].Textile Research journal, 2004,74(8): 657-661.
[3] 谭保辉, 冯志华, 刘丁丁, 等. 基于CFD 的喷气织机辅助喷嘴流场分析[J]. 纺织学报, 2012, 33(7): 123-129. TAN Baohui,FENG Zhihua,LIU Dingding,et al. Flow flied anslysis of auxiliary nozzle of air-jet loom based on CFD[J]. Journal of Textile Research,2012,33( 7) :125-150.
[4] 张平国, 邱学文.喷气织机减磨辅助喷嘴的研制[J].棉纺织技术,2003,31(8): 48-49. Development of auxiliary nozzle of air-jet loom on friction reducing [J]. Cotton Textile Technology, 2003, 31(8): 48-49.
[5] 王贯超, 张平国, 梁海顺, 等.功能性提速辅助喷嘴的研制与探讨[J].纺织器材, 2004,31(6): 339-340. WANG Guanchao,ZHANG Pingguo,LIANG Haishun,et al. Development and approach of functional acceleration donkey nozzle[J]. Textile Accessories, 2004,31(6):339-340.
[6] GUIDO Belforte, GIULIANA Mattiazzo, FRANCANTONIO Testore, et al. Experimental investigation on air-jet loom sub-nozzles for weft yarn insertion[J].Textile Research Journal, 2010, 81(5): 1-7.
[7] Simon De Meulemeester, Patrick Puissiant, et al. Three-dimensional Simulation of the Dynamic Yarn Behavior. Textile Research Journal, 2009, 79(18): 1706-1714.
[8] Ozer Goktepe, Orcun Bozkan.Study on Reduction of Consumption on Air-jet Weaving Machines. Textile Research Journal, 2008, 78(9): 816-824.
[9] 王卫华. 喷气织机辅助喷嘴引纬流场分析及纬纱牵引实验研究[D]. 苏州:苏州大学, 2014: 9-26. WANG Weihua. Analysis of flow field of weft insertion and experimental investigation on weft dragging of the auxiliary nozzle in an air-jet loom[D]. Suzhou: Soochow Uiversity, 2014: 9-26.
[10] 张科. 基于CFD的喷气织机主喷嘴气流场分析及局部结构参数优化[D]. 苏州大学, 硕士论文, 2010: 15-68. ZHANG Ke. Analysis of weft insertion flow of main nozzle in an air jet loom based on CFD and the optimization of local structure parameter[D]. Suzhou: Soochow University, 2010: 15-68.
[11] 张平国.喷气织机引纬原理与工艺[M]. 北京:中国纺织出版社,2005: 32-36. ZHANG Pingguo. Principle and Technology of Weft Insertion in an Air-jet Loom[M]. Beijing: China Textile & Apparel Press, 2005: 32-36.
[1] . Evaluation and optimization of compressed air leakage in air-jet loom [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 130-136.
[2] . Simulation on fiber motion in airflow field of transfer channel [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 55-61.
[3] . Modeling and numerical simulating for for residual ammonia volatilization from yarn bobbin [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(09): 149-154.
[4] . Application status of thermoregulatory mode in clothing comfort evaluation with thermal manikin [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(07): 164-172.
[5] . Numerical simulation of influence of groove type on flow field knside rotor [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(05): 128-133.
[6] . Analysis of weft insertion flow field and gas consumption of auxiliary nozzle in air-jet loom [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(12): 123-128.
[7] . Research progress of numerical simulation of heat and moisture transfer in porous textiles [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(11): 159-165.
[8] . Numerical simulation for 3−D flow field of rotor spinning channel [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 145-150.
[9] . ABAQUS based finite element analysis of heat transfer through woven fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 37-41.
[10] . Influence of auxiliary nozzle and profiled reed in air-jet loom on flow field [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 129-133.
[11] . Influence of folding jet orifice position on air flow characteristics in pure pneumatic tucker [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(08): 125-131.
[12] . Structure optimization design of auxiliary nozzle for air-jet loom [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(06): 112-117.
[13] . Structure optimization of single cicular hole auxiliary nozzle in air-jet loom [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(01): 142-146.
[14] . Research progress of heat transfer mechanism of air gap under firefighter protective clothing [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(01): 167-172.
[15] . Microscopic numerical somulation of transverse permeability of fiber bundles in liquid composite molding [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(08): 22-27.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] . Comprehensive evaluation model of apparel retailing service quality perception under C2C environment[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 164 -170 .
[2] . Influence factors of helpfulness of online review on garment product[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 158 -163 .
[3] . Emotion classification of necktie pattern based on convolution neural network[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 117 -123 .
[4] . Detection and evaluation on yarn hairiness of blackboard with image processing[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 144 -149 .
[5] . Noise source identification of carpet tufting machine based on empirical mode decomposition and energy characteristics[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 138 -143 .
[6] . Extract of image elements for blue calico based on contour fitting[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 150 -157 .
[7] . Research progress on sweating rate distribution of human body[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 179 -184 .
[8] . In fluence of sleeveless fitted cheongsam waist dart distribution on apparel modeling[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 105 -109 .
[9] . Collar-placket shape and knotting way of modern folk children's coat and jacket[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 110 -116 .
[10] . Enhancement on anaerobic biological decolorization of azo dyes wastewater[J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 83 -87 .