Journal of Textile Research ›› 2018, Vol. 39 ›› Issue (09): 139-145.doi: 10.13475/j.fzxb.20171008407

Previous Articles     Next Articles

Numerical simulation for twisting chamber of air jet vortex spinning based on hollow spindle with spiral guiding grooves

  

  • Received:2017-10-24 Revised:2018-06-09 Online:2018-09-15 Published:2018-09-12

Abstract:

In order to improve the yarn strength, a kind of hollow spindle with spiral guiding grooves was proposed to solve the problem of low yarn strength for air jet vortex spinning. In this paper, the numerical simulation method was used to study the flow field characteristics of the twisting chamber of air jet vortex spinning based on hollow spindle with spiral guiding grooves and to verify the improved effect of spiral guiding groove structure of hollow spindle on the yarn property. The results show that the spiral guiding groove structure can guide the flow of air and increase the twisting action of the free-end fiber. In addition, the existence of spiral guiding grooves causes the static pressure and velocity of the airflow inside and outside the grooves to be different, which results in the migration and self-twist of the free-end fiber, and further improves the yarn strength of the air jet vortex spinning.

Key words: air jet vortex spinning, hollow spindle, spiral-guided groove, numerical simulation, yarn strength

[1] . Comprehensive performance of auxiliary nozzle of air-jet loom based on Fluent [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 124-129.
[2] . Simulation on fiber motion in airflow field of transfer channel [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 55-61.
[3] . Comparative analysis of conventional and self twist jet vortex spinning [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(01): 25-31.
[4] . influence of hollow spindler structure parameters on flow field of air jet vortex spinning [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(12): 135-140.
[5] . Modeling and numerical simulating for for residual ammonia volatilization from yarn bobbin [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(09): 149-154.
[6] . Principle and analysis of slub yarns spun by three-channel digital ring spinning [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(07): 39-43.
[7] . Application status of thermoregulatory mode in clothing comfort evaluation with thermal manikin [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(07): 164-172.
[8] . Numerical simulation of influence of groove type on flow field knside rotor [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(05): 128-133.
[9] . Research progress of numerical simulation of heat and moisture transfer in porous textiles [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(11): 159-165.
[10] . Influence of auxiliary nozzle and profiled reed in air-jet loom on flow field [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 129-133.
[11] . Numerical simulation for 3−D flow field of rotor spinning channel [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 145-150.
[12] . ABAQUS based finite element analysis of heat transfer through woven fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 37-41.
[13] . Influence of folding jet orifice position on air flow characteristics in pure pneumatic tucker [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(08): 125-131.
[14] . Research progress of heat transfer mechanism of air gap under firefighter protective clothing [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(01): 167-172.
[15] . Construction of raw cotton spinnability index based on principal component analysis [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(08): 16-21.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] . [J]. JOURNAL OF TEXTILE RESEARCH, 1992, 13(07): 27 -30 .
[2] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(03): 110 -111 .
[3] CHENG Ling;HE Yong . Synchronous speed control system with PLC[J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(1): 97 -99 .
[4] . [J]. JOURNAL OF TEXTILE RESEARCH, 1984, 5(08): 5 -10 .
[5] . [J]. JOURNAL OF TEXTILE RESEARCH, 1984, 5(08): 26 -29 .
[6] . [J]. JOURNAL OF TEXTILE RESEARCH, 2000, 21(04): 67 -68 .
[7] . [J]. JOURNAL OF TEXTILE RESEARCH, 2003, 24(06): 79 -81 .
[8] . [J]. JOURNAL OF TEXTILE RESEARCH, 1986, 7(04): 57 -59 .
[9] . [J]. JOURNAL OF TEXTILE RESEARCH, 1996, 17(05): 4 -8 .
[10] QI Jing;ZHANG Xin. Preprocessing of 3D body data before statistic analysis[J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(1): 42 -45 .