Journal of Textile Research ›› 2019, Vol. 40 ›› Issue (05): 41-46.doi: 10.13475/j.fzxb.20180600706

• Textile Engineering • Previous Articles     Next Articles

Principle and application of partial knitting on fully formed sweater

WANG Pan, WU Zhiming()   

  1. Engineering Research Center for Knitting Technology, Ministry of Education, Jiangnan University, Wuxi,Jiangsu 214122, China
  • Received:2018-06-01 Revised:2018-10-29 Online:2019-05-15 Published:2019-05-21
  • Contact: WU Zhiming E-mail:wxwuzm@163.com

RichHTML

14

PDF (PC)

184

Abstract:

In order to better realize the partial three-dimensional forming of fully formed sweater, the application of the partial knitting principle on fully formed sweater based on the four-bed computerized flat knitting machine and design system of SDS-ONE APPEX 3 was researched emphatically. The partial knitting process was divided into normal partial knitting and partial knitting in proportion according to the knitting methods. The application of partial knitting in shoulder slope, neck, lower hem, hanging shoulder and flat sleeve top was discussed. The results show that the normal partial knitting can be applied to form the oblique line shape with smooth and smooth outer edge, front and back neck drop curve, irregular lower hem. The partial knitting in proportion is the unique knitting method of fully formed sweater. It is mainly applied in the process of hanging shoulder and flat sleeve top. It is applied to maintain a tubular balance and realize the connection of sleeves and body and a tube fabric with a certain height difference is formed at last. The adoption of partial knitting technology can improve the comfort and beauty of fully formed sweater, and also provide ideas for the design development of sweater, so as to meet the personalized needs of contemporary consumers.

Key words: fully formed sweater, partial knitting, structural application, four-bed computerized flat knitting machine

CLC Number: 

  • TS941.64

Fig.1

Partial knitting"

Fig.2

Unilateral suspension and unilateral knitting"

Fig.3

Both sides suspension and middle knitting"

Fig.4

Middle suspension and both sides knitting"

Fig.5

Moving trajectory of spun at ratio of 2∶4∶3"

Fig.6

Knitting process of flat shoulder type 1"

Fig.7

Knitting process of flat shoulder type 2"

Fig.8

Knitting process of dropped shoulder"

Fig.9

Application of partial knitting on collar. (a) Knitting process of collar;(b) Knitting appearance of collar"

Fig.10

Application of partial knitting on lower hem. (a) Knitting process of slant hem; (b) Knitting appearance of slant hem; (c) Knitting process of round hem;(d) Knitting appearance of round hem"

Fig.11

Application of partial knitting on shouder. (a) Knitting ratio of 2∶4∶3; (b) Partial knitting process in proportion"

Fig.12

Application of partial knitting on flat sleeve top. (a) Parts of flat sleevetop; (b) Knitting appearance of flat sleeve top"

[1] 王敏. 四针床电脑横机的全成形工艺[J]. 纺织学报, 2017,38(4):62-63.
WANG Min. Whole garment knitting process on four-bed computerized flat knitting machine[J]. Journal of Textile Research, 2017,38(4):62-63.
[2] 罗璇, 蒋高明, 丛洪莲. 采用局部编织技术的毛衫特殊结构工艺与设计[J]. 纺织学报, 2016,37(2):55-60.
LUO Xuan, JIANG Gaoming, CONG Honglian. Process and design of woolen sweater special structure based on partial technology[J]. Journal of Textile Research, 2016,37(2):55-60.
[3] 杨苏梅, 毛莉莉. 引返编织在羊毛衫设计中的应用[J]. 毛纺科技, 2009,37(1):44-48.
YANG Sumei, MAO Lili. Application of returning knit in woollen sweater design[J]. Wool Textile Journal, 2009,37(1):44-48.
[4] 邱庄岩, 吴志明, 蒋高明. 全成形毛衫肩袖成形工艺[J]. 纺织学报, 2018,39(3):56-60,66.
QIU Zhuangyan, WU Zhiming, JIANG Gaoming. Forming process of shoulder and sleeves of whole garment[J]. Journal of Textile Research, 2018,39(3):56-60,66.
[5] 蔡雨琪. 针织成形局部编织工艺的研究与设计创新[D]. 北京:北京服装学院, 2014: 22.
CAI Yuqi. The research and innovation design of partial knitting of fully fashioned knitwear[D]. Beijing:Beijing Institute of Fashion Technology, 2014: 22.
[6] 彭佳佳, 蒋高明, 卢致文, 等. 全成形毛衫在双针床电脑横机上的编织工艺[J]. 纺织学报, 2015,36(11):53-54.
PENG Jiajia, JIANG Gaoming, LU Zhiwen, et al. Technical study of whole garment on V-bed computerized flat knitting machine[J]. Journal of Textile Research, 2015,36(11):53-54.
[7] 彭佳佳, 蒋高明, 丛洪莲, 等. 全成形毛衫的结构与编织原理[J]. 纺织学报, 2017,38(11):48-55.
PENG Jiajia, JIANG Gaoming, CONG Honglian, et al. Structure and knitting principle of whole garment[J]. Journal of Textile Research, 2017,38(11):48-55.
[8] 杨卫平. 全成形毛衫的结构与编织工艺研究[D]. 上海:东华大学, 2016: 22-29.
YANG Weiping. Investigation on structure and knitting technology of fully fashioned sweater[D]. Shanghai:Donghua University, 2016: 22-29.
[9] 祝细. 电脑横机织可穿针织服装的编织工艺及其性能研究[D]. 天津:天津工业大学, 2011: 5-6.
ZHU Xi. Research of the knitting process and performance for knit & wear clothes on the domestic computerized flat knitting[D]. Tianjin: Tianjin Polytechnic University, 2011: 5-6.
[10] 丛洪莲, 王迪. 针织毛衫袖型建模与工艺实现[J]. 纺织学报, 2014,35(8):70-74.
CONG Honglian, WANG Di. Modeling and technology realization of knitted sweater sleeve type[J]. Journal of Textile Research, 2014,35(8):70-74.
[1] WANG Pan, WU Zhiming. Transverse knitting method and forming process of fully formed sweater [J]. Journal of Textile Research, 2019, 40(10): 73-78.
[2] . Whole garment knitting process on four-bed computerized flat knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(04): 61-67.
Viewed
Full text
198
HTML PDF
Just accepted Online first Issue Just accepted Online first Issue
0 0 14 0 0 184

  From Others local
  Times 7 191
  Rate 4% 96%

Abstract
1106
Just accepted Online first Issue
0 0 1106
  From Others local
  Times 477 629
  Rate 43% 57%

Cited
Web of Science  Crossref   ScienceDirect  Search for Citations in Google Scholar >>
 
This page requires you have already subscribed to WoS.
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd