Journal of Textile Research ›› 2020, Vol. 41 ›› Issue (11): 59-65.doi: 10.13475/j.fzxb.20200101408

• Textile Engineering • Previous Articles     Next Articles

Influence of layer spacing on ballistic performance of double-plied plain fabric target

ZHOU Yi1,2, LI Hang1, YAN Xiangbang1, LIANG Yaoting1, ZHANG Zhongwei2()   

  1. 1. Key Laboratory of Textile Fiber & Product, Ministry of Education, Wuhan Textile University,Wuhan, Hubei 430200, China
    2. State Key Laboratory of Explosion & Impact and Disaster Prevention & Mitigation, The Army Engineering University of PLA, Nanjing, Jiangsu 210007, China
  • Received:2020-01-09 Revised:2020-06-05 Online:2020-11-15 Published:2020-11-26
  • Contact: ZHANG Zhongwei E-mail:zhangzhongwei.cn@gmail.com

RichHTML

2

PDF (PC)

128

Abstract:

In order to meet the requirements of performance improvement and weight reduction of flexible ballistic panels, and to optimize the structure design of flexible multi-ply ballistic materials, spacing was incorporated between the adjacent layers to study the dynamic response of the front and back layers. This research used ballistic penetration test to characterize the energy absorption capacity of fabric panels, and also made use of a finite element model to analyze the mechanisms of energy absorption. It was found from the ballistic tests that the energy absorption of the target decreases and then increases as the layer spacing widens. When a critical value is reached, the energy absorption stops increasing. The numerical predictions obtained from finite element modeling share similar trend with the experimental results. It was found that the transverse deflection and the stress distribution area of the front layer increase as the layer spacing becomes widened, whereas the magnitude of stress distribution decreases on the rear layer.

Key words: flexible body armor, ballistic material, layer spacing, anti-penetration performance, ballistic penetration

CLC Number: 

  • TS131

Fig.1

Ballistic apparatus"

Fig.2

Projectile (a) and clamp (b)"

Fig.3

Finite element model for yarn, plain weave and projectile. (a)Yarn model; (b) Model of projectile colliding a plain weave"

Fig.4

Impact-residual velocity curves of experimental and finite element models for single and doule layer structures"

Fig.5

Energy absorption as a function of layer spacing for sample targets"

Fig.6

Post-impacted aramid plain weaves. (a) Sample with filament damage; (b) Sample with filament lateral displacement"

Fig.7

Transverse deflections(a)and contour plots of stress distribution(b)for back layer"

Fig.8

Transverse deflections(a)and contour plots of stress distribution(b)for front layer"

Fig.9

Energy absorption as a function of time"

Fig.10

Change of time with strain and kinetic energy for front layer. (a)Strain energy;(b)Kinetic energy"

Fig.11

Change of time with strain and kinetic energy for back layer. (a)Strain energy;(b)Kinetic energy"

Fig.12

Schematic diagram of projectile colliding target"

[1] 乔咏梅, 余铜辉. 软质防弹衣结构分析与性能研究[J]. 警察技术, 2017(3):81-84.
QIAO Yongmei, YU Tonghui. Structural analysis and performance study of soft body armor[J]. Police Technology, 2017(3):81-84.
[2] 陈晓钢. 纺织基防弹防穿刺材料的研究回顾[J]. 纺织学报, 2019,40(6):158-164.
CHEN Xiaogang. Review of research on textile-based bulletproof and puncture-resistant materials[J]. Journal of Textile Research, 2019,40(6):158-164.
[3] CHEESEMAN B A, BOGGEI T A. Ballistic impact into fabric and compliant composite laminates[J]. Composite Structure, 2003,61:161-173.
[4] 顾冰芳, 龚烈航, 徐国跃. Kevlar纤维叠层织物防弹机理和性能研究[J]. 南京理工大学学报, 2007,31(5):638-642.
GU Bingfang, GONG Liehang, XU Guoyue. Study on bulletproof mechanism and performance of Kevlar fiber laminated fabric[J]. Journal of Nanjing University of Science and Technology, 2007,31(5):638-642.
[5] LEE B L, SONG J W, WARD J E. Failure of spectra polyethylene fibre-reinforced composites under ballistic impact loading[J]. Journal of Composite Materials, 1994,28:1202-1225.
[6] CHEN X, ZHU F, WELLS G. An analytical model for ballistic impact on textile based body armour[J]. Composites Part B:Engineering, 2012,45(1):1508-1514.
[7] 周熠, 陈晓钢, 张尚勇, 等. 超高分子量聚乙烯平纹织物在柔性防弹服中的应用[J]. 纺织学报, 2016,37(4):60-64.
ZHOU Yi, CHEN Xiaogang, ZHANG Shangyong, et al. Application of ultra-high molecular-weight polyethylene plain weave on soft body armour[J]. Journal of Textile Research, 2016,37(4):60-64.
[8] CHEN Xiaogang, ZHOU Yi, WELLS G. Numerical and experimental investigations into ballistic performance of hybrid fabric panels[J]. Composites Part B:Engineering, 2014,58:35-42.
[9] YANG Yanfei, CHEN Xiaogang. Study of energy absorption and failure modes of constituent layers in body armour panels[J]. Composites: Part B-Engineering, 2016,98:250-259.
[10] GUO Zherui, CHEN Weinong, ZHENG J. A semi-empirical design parameter for determining the inelastic strike-face mass fraction of soft armor targets[J]. International Journal of Impact Engineering, 2019,125:83-92.
[11] CUNNIFF P M. An analysis of the system effects in woven fabrics under ballistic impact[J]. Textile Research Journal, 1996,66(1):45-58.
[12] PORWAL K P, PHOENIX S L. Effects of layer stacking order on the V 50 velocity of a two-layered hybrid armor system[J]. Journal of Mechanics of Materials and Structures, 2008,3(4):627-639.
[13] ZHOU Yi, HOU Jun, GONG Xiaozhou, et al. Hybrid panels from woven Kevlar® and Dyneema® fabrics against ballistic impact with wearing flexibility[J]. Journal of The Textile Institute, 2017,15:1027-1034.
[14] WANG Ying, CHEN Xiaogang, YOUNG R, et al. An experimental study of the effect of ply orientation on ballistic impact performance of multi-ply fabric panels[J]. Textile Research Journal, 2016.DOI: 10.1177/0040517514566110.
doi: 10.1080/0002889758507210 pmid: 1111270
[15] WANG Ying, CHEN Xiaogang, YOUNG R, et al. A numerical study of ply orientation on ballistic impact resistance of multi-ply fabric panels[J]. Composites Part B:Engineering, 2015,68:259-265.
[16] PORWAL K P, PHOENIX S L. Modeling system effects in ballistic impact into multi-layered fibrous materials for soft body armor[J]. International Journal of Fracture, 2005,135(1):217-249.
[17] ZHOU Yi, GONG Xiaozhou, ZHANG Shangyong, et al. A numerical investigation into the influence of layer space on panel ballistic performance[J]. Fibers and Polymers, 2015,16(12):2663-2669.
[18] SEBASTAIN S, BAILEY A I, BRISCOE B J, et al. Extensions, displacements and forces associated with pulling a single yarn from a fabric[J]. Journal of Physics D:Applied Physics, 1987,20(1):130.
[19] O'MASTA M R, CRAYON D H, DESSHPANDE V S, et al. Mechanisms of penetration in polyethylene reinforced cross-ply laminates[J]. International Journal of Impact Engineering, 2015,86:249-264.
[20] LEE B L, WALSH T F, WON S T, et al. Penetration failure mechanisms of armor-grade fiber composites under impact[J]. Journal of Composite Materials, 2001,35(18):1605-1633.
[1] CHEN Xiaogang. Trend of research in textile-based protective materials against ballistic and stabbing [J]. Journal of Textile Research, 2019, 40(06): 158-164.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd