Journal of Textile Research ›› 2021, Vol. 42 ›› Issue (03): 149-154.doi: 10.13475/j.fzxb.20200702107
• Apparel Engineering • Previous Articles Next Articles
ZHAN Biqin, CONG Honglian(), WU Guangjun
CLC Number:
[1] | 王敏, 丛洪莲, 蒋高明, 等. 四针床电脑横机的全成形工艺[J]. 纺织学报, 2017,38(4):61-67. |
WANG Min, CONG Honglian, JIANG Gaoming, et al. Whole garment knitting process on four-bed computerized flat knitting machine[J]. Journal of Textile Research, 2017,38(4):61-67. | |
[2] | 邱庄岩, 花芬, 吴志明. 四针床全成形编织工艺及其应用[J]. 纺织学报, 2018,39(8):63-70. |
QIU Zhuangyan, HUA Fen, WU Zhiming. Process and application of full forming knitting with four-needle bed[J]. Journal of Textile Research, 2018,39(8):63-70. | |
[3] | 邱庄岩, 吴志明, 蒋高明. 全成形毛衫肩袖成形工艺[J]. 纺织学报, 2018,39(3):56-60, 66. |
QIU Zhuangyan, WU Zhiming, JIANG Gaoming. Forming process of shoulder and sleeves of whole garment[J]. Journal of Textile Research, 2018,39(3):56-60, 66. | |
[4] | 路丽莎, 蒋高明, 罗璇. 全成形毛衫腋下拼角编织工艺及性能[J]. 纺织学报, 2019,40(2):69-75. |
LU Lisha, JIANG Gaoming, LUO Xuan. Knitting process and properties analysis of underarm stitching of fully-fashioned garment[J]. Journal of Textile Research, 2019,40(2):69-75. | |
[5] | 王盼, 吴志明. 全成形毛衫局部编织原理及其应用[J]. 纺织学报, 2019,40(5):41-46. |
WANG Pan, WU Zhiming. Principle and application of partial knitting on fully formed sweater[J]. Journal of Textile Research, 2019,40(5):41-46. | |
[6] | 彭佳佳, 蒋高明, 丛洪莲, 等. 全成形毛衫的结构与编织原理[J]. 纺织学报, 2017,38(11):53-60. |
PENG Jiajia, JIANG Gaoming, CONG Honglian, et al. Structure and knitting principle of whole garment[J]. Journal of Textile Research, 2017,38(11):53-60. | |
[7] | 罗璇, 彭佳佳, 蒋高明, 等. 全成形毛衫样板及成形方法[J]. 纺织学报, 2018,39(7):105-110. |
LUO Xuan, PENG Jiajia, JIANG Gaoming, et al. Design and knitting shaping method of fully-fashioned knitwear[J]. Journal of Textile Research, 2018,39(7):105-110. | |
[8] | 刘博, 丛洪莲. 四针床全成形休闲西服的工艺设计与成形原理[J]. 纺织学报, 2020,41(4):129-134. |
LIU Bo, CONG Honglian. Process design and knitting principle of one-piece casual suits based on four-needle-bed flat knitting machine[J]. Journal of Textile Research, 2020,41(4):129-134. | |
[9] | 张卫红. 在电脑横机上编织整件毛衫的原理及工艺[J]. 针织工业, 2004(5):48-50. |
ZHANG Weihong. Theory and process of the whole knitted wear on the computer computerized flat knitting machine[J]. Knitting Industries, 2004(5):48-50. | |
[10] | 孟海涛. 电脑横机拷针的工艺创新[J]. 针织工业, 2010(9):67-68. |
MENG Haitao. Technological innovation of computer flat knitting machine[J]. Knitting Industries, 2010(9):67-68. |
[1] | DAI Ning, PENG Laihu, HU Xudong, ZHONG Yaosen, QI Dongming. Transverse vibration characteristics of knitting needles in seamless underwear machines based on axial movement cantilever beam theory [J]. Journal of Textile Research, 2021, 42(02): 193-20. |
[2] | GUO Weidong, XIA Fenglin, ZHANG Qi. Influencing factors on high speed of electronic shogging system in warp knitting machines [J]. Journal of Textile Research, 2021, 42(01): 162-166. |
[3] | ZHAO Boyu, LIANG Xinhua, CONG Honglian. Structural modeling and process practice of three-dimensional fully fashioned face masks woven by computerized flat knitting machine [J]. Journal of Textile Research, 2020, 41(12): 59-65. |
[4] | DAI Ning, PENG Laihu, HU Xudong, CUI Ying, ZHONG Yaosen, WANG Yuefeng. Natural frequency characterization based on Euler-Bernoulli beam theory on knitting seamless underwear [J]. Journal of Textile Research, 2020, 41(12): 144-150. |
[5] | DAI Ning, PENG Laihu, HU Xudong, CUI Ying, ZHONG Yaosen, WANG Yuefeng. Method for testing natural frequency of weft knitting needles in free state [J]. Journal of Textile Research, 2020, 41(11): 150-155. |
[6] | LI Dongdong, ZHANG Chengjun, ZUO Xiaoyan, ZHANG Chi, LI Hongjun, ZHOU Xiangyang. Study on magnetic field distribution in permanent magnetic needle drive using hybrid magnetic suspension needle [J]. Journal of Textile Research, 2020, 41(09): 136-142. |
[7] | CHEN Xi, MIAO Xuhong, NIU Li, HAN Xiaoxue, JIANG Gaoming. Sleeve-body connection technique for segmentation design of whole-garment flat-sleeve sweaters [J]. Journal of Textile Research, 2020, 41(09): 76-80. |
[8] | LIU Bo, CONG Honglian. Research and implementation of flat-bed knitting process model of fully formed suit [J]. Journal of Textile Research, 2020, 41(07): 53-58. |
[9] | WANG Songsong, PENG Laihu, HU Xudong. Knitting machine information modeling under OPC unified architecture framework [J]. Journal of Textile Research, 2020, 41(05): 167-175. |
[10] | LIU Bo, CONG Honglian. Process design and knitting principle of one-piece casual suits based on four-needle-bed flat knitting machine [J]. Journal of Textile Research, 2020, 41(04): 129-134. |
[11] | SUN Shuai, MIAO Xuhong, ZHANG Qi, WANG Jin. Yarn tension fluctuation on high-speed warp knitting machine [J]. Journal of Textile Research, 2020, 41(03): 51-55. |
[12] | WANG Jiandong, XIA Fenglin, LI Yalin, ZHAO Yuning. Optimal sliding mode control of electronic transverse servo for comb bar of warp knitting machine [J]. Journal of Textile Research, 2020, 41(02): 143-148. |
[13] | WANG Songsong, PENG Laihu, DAI Ning, SHEN Chunya, HU Xudong. Research on knitting machine interconnection and interoperability structure based on industrial internet [J]. Journal of Textile Research, 2020, 41(01): 165-173. |
[14] | LIANG Jialu, CONG Honglian, ZHANG Aijun. Technical design model of weft-knitted two-side jacquard fabric [J]. Journal of Textile Research, 2020, 41(01): 69-74. |
[15] | DAI Ning, HU Xudong, PENG Laihu. Real-time motion control technology of knitting circular machine [J]. Journal of Textile Research, 2019, 40(12): 134-139. |
|