JOURNAL OF TEXTILE RESEARCH ›› 2014, Vol. 35 ›› Issue (8): 27-0.

Previous Articles     Next Articles

Impact of fabric tensile and bending properties on adhesion property under wet condition at low tension

  

  • Received:2013-07-31 Revised:2014-02-11 Online:2014-08-15 Published:2014-08-15

Abstract: In order to study the adhesion property of fabric when it was seperated from skin in wet condition, the new developed wet fabric adhesion apparatus was used to test the adhesion property of fabric to skin in wet condition. There were three indices: adhesion force, adhesion distance and adhesion work. And a wet adhesion curve can be obtained from this method. Based on the observation and analysis of ten adhesion curves’ shapes of different kinds of fabric samples, it was concluded that adhesion curves had common characteristics. And it was found that the curve can be divided in to three parts and each part reflected different separation process. The KES system was adopted to test tensile and bending properties of fabric samples in order to study the impact of mechanics on wet fabric comfortability; meanwhile, adhesion data and curves were tested at the separation speed of 15mm/min. The results show that it is positive correlation between the tensile work and maximum adhesion force, opposite from the bending rigidity and the curve tends to be flatter with the longer adhesion distance.

Key words: wet adhesion property, adhesion curve, tensile property, bending property, low tension

CLC Number: 

  • TS101.2
[1] . Control of physical and chemical properties of oxidation degummed ramie fiber with 1, 8-dihydroxyanthraquinone [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 78-85.
[2] . Tesile properties of carbon-aramid hybrid 3-d braided composites [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 49-54.
[3] . Classified extraction and properties of bamboo fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(11): 9-15.
[4] . Bending properties and finite element method simulation of honeycomb 3-D integrated woven composites [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(11): 56-60.
[5] . Mechanical analysis of flame retardant three-strand yarn of polyester / aramid fiber / Poly(p-phenylene-2,6-benzo-bisoxazole) fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(06): 28-32.
[6] . Preparation and properties of polylactic acid/polypropylene blend spunbonded fibers [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(01): 13-16.
[7] . Structure and property of methanol protein modified viscose fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 12-15.
[8] . Mechanical properties of hemp/polylactic acid composite foamed material [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(01): 28-34.
[9] . Influence of micro-dissolution treatment on tensile properties of hemp/cotton blended fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(10): 97-0.
[10] . Comparative analysis of test results of different fabric bending behavior test apparatus [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(07): 126-130.
[11] . Micro-structure analysis and bending property prediction of three-dimensional braided composites with T section [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(06): 42-0.
[12] . Preparation and properties of jute/soybean dregs/starch composites [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(8): 44-0.
[13] . Analysis of bending and drape properties of seamed fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(7): 95-99.
[14] . Preparation of water saving and moisture retention film for concrete curing [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(5): 12-16.
[15] . Spinning process of cellular photocatalyst fiber/cotton blended yarns and properties thereof [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(4): 32-36.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!