Journal of Textile Research ›› 2015, Vol. 36 ›› Issue (03): 48-53.

Previous Articles     Next Articles

Influence of heat-setting process on performance of batt-on-mesh papermaking felts

  

  • Received:2014-03-05 Revised:2014-07-03 Online:2015-03-15 Published:2015-03-16
  • Contact: yao bingDENG E-mail:bydeng@jiangnan.edu.cn

PDF (PC)

369

Abstract:

In order to further optimize the heat-setting process of batt-on-mesh(BOM) papermaking felts, orhogonal test was used to analyze the influence of temperature, time and moisture content on performances of BOM papermaking felt. The compression elasticity, permeability and water resistance of original sample and heat-treated samples were tested. The data were analyzed by fuzzy mathematics method to evaluate the performance of heat-treated samples and determine the optimum process conditions. The results show that the permeability and water resistance of heat-treated samples were declined. The compression elasticity of the heat-treated samples, however, was improved.The optimum process suitable for BOM papermaking felt in the experiment were as following: the best temperature was set at 240 ℃, time was is at 60s and 30s for positive and negative sides respectively, and moisture content of BOM papermaking felt was set at 30%.

Key words: batt-on-mesh papermaking felt, heat-setting, orthogonal test, performance

CLC Number: 

  • TS174.3
[1] . Preparation and properties of polypropylene air filter membrane by melt differential electrospinning [J]. Journal of Textile Research, 2018, 39(10): 12-17.
[2] . Study on stab-resistant performance of shear thickening fluids impregnated ultra-high-molecular-weight polyethylene fabric [J]. Journal of Textile Research, 2018, 39(10): 58-62.
[3] . Comprehensive evaluation of thermal protection and comfort of outer fabrics of firefighter protective clothing [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 100-104.
[4] . Air filtration performance of polyether sulfone nonwoven composite membranes [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(07): 55-62.
[5] . Prediction on filtration performance of melt blown nonwoven fabric based on rough set theory and support vector machine [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(06): 142-148.
[6] . Connotation and evaluation of fiber carding properties [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 24-29.
[7] . Application of shape memory material in functional and protective clothing [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 170-174.
[8] . Preparation and properties of hydroxyl-terminated polybutadiene phase-change polyurethane microcapsule [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(03): 86-91.
[9] . Prediction of skin injury degree based on modified model of heat transfer in three-layered thermal protective clothing [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(01): 111-118.
[10] . Anti-wrinkle finishing of organosilicone modified polyurethane/acrylate copolymer emulsion for cotton fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(01): 89-93.
[11] . Biosynthesis of Eucommia ulmoides silver nanoparticles and application thereof in reductive catalytic degradation of Direct Orange 26 [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(01): 104-110.
[12] . Comparative analysis of conventional and self twist jet vortex spinning [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(01): 25-31.
[13] . Preparation of crosslinking and high performance polymers [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(01): 6-10.
[14] . Test method and characterization of 3-D draping for fabrics based on human body form [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(01): 39-44.
[15] . Analysis of evaluation method of thermal protective performance of firefighter protective clothing exposure to low level radiation [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(12): 162-168.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(03): 134 -136 .
[2] . [J]. JOURNAL OF TEXTILE RESEARCH, 1987, 8(02): 48 .
[3] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(04): 36 -37 .
[4] . [J]. JOURNAL OF TEXTILE RESEARCH, 1986, 7(05): 17 -20 .
[5] . [J]. JOURNAL OF TEXTILE RESEARCH, 1990, 11(04): 33 -36 .
[6] . [J]. JOURNAL OF TEXTILE RESEARCH, 1992, 13(07): 24 -26 .
[7] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(04): 69 -70 .
[8] . [J]. JOURNAL OF TEXTILE RESEARCH, 2004, 25(03): 44 -47 .
[9] XU Ji-hong;ZHANG Wen-bin. Theoretical study on optimal cutting plan of custom-made garments[J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(5): 80 -82 .
[10] MA Shi-ping. 基于MATLAB的六连杆打纬机构优化设计及仿真[J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(3): 40 -42 .
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd