JOURNAL OF TEXTILE RESEARCH ›› 2016, Vol. 37 ›› Issue (10): 130-134.
Previous Articles Next Articles
Received:
Revised:
Online:
Published:
Abstract:
In order to develop the products of warp knitted broche jacquard, the paper studies the design problem of the correspinding selection hook-needle motion mechanism. The mechanism os the key structure in the machine. The motion of the selection hook-needle requires reciprocating mowements with dwells. According to the requirements of the requirements of variation, stroke, long distance transmission in the expecting motion, the correspinding selection hook-needle mechanism is type synthesized a planar linkage-cam combined mechanism which is connected in series by an eight-bar linkage and a cam mechanism. Then the graphical inversion method is adopted to figure out the dimensions of the two groups of planar four-barmechanisms. And the dimensions of slide mechanism and curve of can are built by using analytical method. For the selection hook-needle in RJWB3/2, the stroke is 19 mm. And the cam nagles for rise, outer dwell, return, inner dwell are 150°,30°,80° and 100°, respectively. Based on these parameters the corresponding dimensions of linkages and curve of the cam are designed.
Key words: warp knitted machine, jacquard, broche, linkage mechanism, cam mechanism
0 / / Recommend
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
URL: http://www.fzxb.org.cn/EN/
http://www.fzxb.org.cn/EN/Y2016/V37/I10/130
Cited