JOURNAL OF TEXTILE RESEARCH ›› 2017, Vol. 38 ›› Issue (05): 110-114.doi: 10.13475/j.fzxb.20160507305

Previous Articles     Next Articles

Calculating method of characteristics girth of young female body by 3-D scanning data

  

  • Received:2016-05-30 Revised:2016-10-14 Online:2017-05-15 Published:2017-05-16

PDF (PC)

377

Abstract:

In order to test the feasibility og predicting the circumference of the body by the width and thickness of the body's characteristic position, 330 young women aged 20 to 26 years old were taken as samples for study. Based on 3-D body scanning data, the horizontal section of chest circumference and lwoer chest circumference, waist circumference, abdominal circumference and hip circumference of five body feature parts were obtained by Imageware software.The width and thickness of the horizontal section were measured and the ratio was calculated. Characteristic coefficient was introuced to divide the characteristic parts into six categories, and the correlation analysis on the characteristics of girth and its width and thickness was done to verify the feasibility of the two linear regression equation design. Regression equation of characteristics of girth was established and verifiede by categories. Test results shwo that measuerments predicted by the method has an error of ± 2 cm with numbers measured by 3-D scanning measuring and the average error is within 0.7cm.

Key words: body measurement, 3-D scanning, characteristic girth, circumference calculation, youth female body

[1] 苏军强,刘国联,袁卫娟.基于三维人体测量的服装工业技术数字化研究[J].纺织导报,2009(6):110-111.
SU Junqiang, LIU Guolian, YUAN Weijuan. Study on the digital garment technology based on 3D body measurement[J]. China Textile Leader, 2009(6):110-111.
[2] 匡才远,张秋辰,孔海燕,等.中老年男性体型特征的测量与分析[J].苏州大学学报:工科版,2008, 28(1):17-22.
KUANG Caiyuan, ZHANG Qiuchen, KONG Haiyan,et al.Measurement and analysis on bodily from of medium-elderly men[J]. Journal of Suzhou University: Engineering Science Edition, 2008, 28(1):17-22.
[3] 李晓久,王玉秀,刘皓.非接触式人体测量系统中人体体型分类与自动判别[J].天津工业大学学报,2007, 26(5):33-35.
LI Xiaojiu, WANG Yuxiu, LI Hao. Classification and identification of body type in non-contacted body measurement system[J]. Journal of Tianjin Polytechnic University, 2007, 26(5):33-35.
[4] 钱倩,黄秀丽,刘国联.青年女性肢体围度尺寸预测方法探讨[J].苏州大学学报:工科版,2008, 28(6):24-28.
QIAN Qian, HUANG Xiuli, LIU Guolian. Research on prediction methods of limbs girths of young females[J]. Journal of Suzhou University: Engineering Science Edition, 2008, 28(6):24-28.
[5] 刘芳.面向服装量身定制的非接触式人体测量技术研究[D].大连:大连工业大学,2013.
LIU Fang. Research on non-contact body measurement technology for customizing[D]. Dalian :Dalian Polytechnic University,2013.
[6] 任弘,王馨塘,吴晓薇,等.三维人体扫描技术在身体形态测量中的应用[J].北京体育大学学报, 2013(1):51-54.
REN Hong, WANG Qintang, WU Xiaowei, et al. Application of 3D body scan technique to the measurement and evaluation in sports science[J]. Journal of Beijing Sport University, 2013(1):51-54.
[7] 孙晓东.人体点云数据处理中若干问题的研究[D].北京:北京工业大学,2012.
SUN Xiaodong. Research on several problems in point cloud data processing of human body[D]. Beijing :Beijing University of Technology, 2012.
[8] SU Junqiang, LIU Guolian, XU Bugao. Development of individualized pattern prototype based on classification of body features[J]. International Journal of Clothing Science and Technology, 2015,27(6):895-907.
[9] SU Junqiang, GU Bingfei, LIU Guolian, et al. Determination of distance ease of pants using 3D scanning data[J]. International Journal of Clothing Science and Technology, 2015, 27(1):47-59.
[10] GU Bingfei, SU Junqiang, LIU Guolian, Pattern alteration of women’s suits based on ease distribution[J]. International Journal of Clothing Science and Technology, 2016, 28(2):201-215.
[1] . Fitting and verifying of males’s back graphics measured by non-contact scanner [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 111-115.
[2] . Camber features of women's shoulder and influence thereof on fitted clothes' structure [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(10): 94-100.
[3] . Predicting model of young women’s breast surface area [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(10): 101-106.
[4] . Survey and analysis on domestic and overseas human body database for garments’ use [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(06): 141-0.
[5] . Construction of recognition model for young females’ hip shapes using probabilistic neural network (PNN) method based on 3-D body measurement [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(4): 100-0.
[6] LI Xiao-Zhi.  Construction of 3-D body surface model based onpPartitioning [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(9): 145-0.
[7] . Experimental study of grating phase-shifting profilometry for body measurement [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(6): 83-87.
[8] WANG YongJin. Study of body anthropometrical method in motion state [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(4): 104-110.
[9] . Optical triangulation and its applications in body measurement [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(12): 95-101.
[10] WANG Hong-Fu. The study of the Womens′ shoulder based on 3-D body measurement [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(5): 95-97.
[11] ZHENG Juan;DAI Jianguo;XU Rongrong;CHEN Meizhen;SHAO Xinyang. Development of draping specific ease model [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(3): 105-109.
[12] SONG Hongxing;LI Zhong;NI Hui;GAO Jun;PENG Chensong. Size information extraction from 3-D body based on approximate shortest paths [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(3): 138-142.
[13] QIAN Xiaonong;YIN Bing. Research on subdividing of the human body recognition based on 3D body measurement [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(2): 107-111.
[14] DAN Rui;FAN Xuerong;CHEN Dongsheng;WANG Qiang;. Study on pressure at top part of man’s socks using finite element method [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(1): 105-110.
[15] WANG Yongjin;MOK Pikyin;LI Yi;KWOK Yilin. Effects of waist and lower limb movement on clothing ease design [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(3): 92-97.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd